Product Code: #8800-INSULATION COATING
Chemical Name/Class: LATEX CAS Number:
-------------------------------------------------------------------------------
SECTION IIA: HAZARDOUS INGREDIENTS
(To Nearest .10%) Vapor
Ingredient CAS Number % by Wt. % by Vol. LEL Press.
1.
NA = Not Applicable; NE = Not Established
-------------------------------------------------------------------------------
SECTION IIB: OCCUPATIONAL EXPOSURE LIMITS
----OSHA PEL's------ -------------------ACGIH TLV's----------

.
.
.
.
.
.
.
.
NA = Not Applicable; NE = Not Established
-------------------------------------------------------------------------------
SECTION III: PHYSICAL DATA
Boiling Range (degrees F): 212 - 212.00 Pounds per Gallon: 5.98
Vapor Density: HEAVIER THAN AIR Evaporation Rate: SLOWER THAN ETHER
Solubility in Water: 100

Volatiles (%) by Weight by Volume
Total 48.7 33.8
Exempt VOC 48.7 33.8
Non-exempt 0 0

VOC wt/gal: .00 lbs non-exempt solvent per adjusted gallon
Appearance:
-------------------------------------------------------------------------------
SECTION IV: FIRE AND EXPLOSION HAZARD DATA
Flammability Classification:
OSHA: NON FLAMMABLE DOT: NONFLAMMABLE
Flash Point: NA (Method: )

Extinguishing Media: CO2/FOAM

-------------------------------------------------------------------------------
MCM PAINTS Page 1
#8800-INSULATION COA Revision Date: 04/03/01
MATERIAL SAFETY DATA SHEET
#8800-INSULATION COATING Printed: 05/10/04 Revised: 04/03/01 Page 2
===============================================================================
Unusual Fire and Explosion Hazards
COOL CONTAINERS WITH WATER STREAM IN THE EVENT OF FIRE

Special Firefighting Procedures
DO NOT ENTER CONFINED FIRE SPACE WITHOUT FULL PROTECTIVE
GEAR
-------------------------------------------------------------------------------
SECTION V: HEALTH HAZARD DATA
Effects of Overexposure
EYES;LIQUID OR VAPOR CONTACT CAN CAUSE PAINFULL EYE IRRITATION
SKIN;BRIEF CONTACT CAN BE MILDLY IRRITATING. AVOID EXCESSIVE CONTACT
INHALATION;VAPORS CAN BE IRRITATING TO NOSE AND THROAT. SYMPTOMS OF
OVEREXPOSURE MAY INCLUDE HEADACHE, NAUSEA, VOMITING, DROWSINESS.
INGESTION; SLIGHTLY TOXIC

Medical Conditions Prone to Aggravation by Exposure
HEART CONDITIONS, ASTHMA

Primary Routes of Entry into the Body, and Effects
INHALATION,DERMAL CONTACT, EYE CONTACT, INGESTION.

EMERGENCY FIRST-AID PROCEDURES
EYES; FLUSH WITH WATER FOR 15 MIN. REFER TO PHYSICIAN
SKIN; WASH WITH SOAP AND WATER, REMOVE CONTAMINATED CLOTHING
INHALATION; REMOVE TO FRESH AIR. PROVIDE OXYGEN IF BREATHING IS DIFFICULT
INGESTION; DO NOT GIVE LIQUIDS IF UNCONSCIOUS. OTHERWISE GIVE NO MORE THAN
2 GLASSES OF WATER AND INDUCE VOMITING.
-------------------------------------------------------------------------------
SECTION VI: REACTIVITY DATA

Stability: STABLE Hazardous Polymerization WILL NOT OCCUR.

Hazardous Decomposition Products
CARBON MONOXIDE, AND UNIDENTIFIED ORGANIC COMPOUNDS

Conditions to Avoid
HEAT SPARKS AND OPEN FLAMES

Incompatibilities (Materials to Avoid)
OXIDIZING MATERIALS
-------------------------------------------------------------------------------
SECTION VII: SPILL OR LEAK PROCEDURES; WASTE DISPOSAL
Steps to be taken if Material is Leaked or Spilled
DIKE AND CONTAIN SOAK UP RESIDUE WITH ABSORBENT MATERIAL

Waste Disposal Methods
DISPOSE IN RECRA APPROVED FACILITY
-------------------------------------------------------------------------------
SECTION VIII: SAFE HANDLING AND USE INFORMATION
Respiratory Protection
YES

Ventilation
YES

-------------------------------------------------------------------------------
MCM PAINTS Page 2
#8800-INSULATION COA Revision Date: 04/03/01
MATERIAL SAFETY DATA SHEET
#8800-INSULATION COATING Printed: 05/10/04 Revised: 04/03/01 Page 3
===============================================================================
Protective Gloves
YES

Eye Protection
YES

Other Protective Equipment
APRON

Hygienic Practices
WASH AFTER HANDELING
-------------------------------------------------------------------------------
SECTION IX: SPECIAL PRECAUTIONS
Handling and Storing
STORE IN COOL DRY PLACE PROTECT FROM FREEZING

Other Precautions

===============================================================================
END OF MSDS
===============================================================================

-------------------------------------------------------------------------------
MCM PAINTS Page 3
#8800-INSULATION COA Revision Date: 04/03/01